BRAKE BOOSTER REBUILD KIT
$128.70 inc. GST
Brake booster rebuild kit to suit all right hand drive 2002s. Kit includes all required rubber seals and o-rings, foam air filter element, plus 2 gaskets.
There are two types of boosters that your 2002 may be fitted with. All 2002s were originally fitted with the same booster, but over the years, many have been swapped with E9 boosters. Externally they look identical, however the internal seals are different diameters. The easiest way to check which booster you have is to remove the 6 screws holding the air valve assembly cover, remove the diaphragm & spring, then remove the special 2-pin cover**. Measure the ID of the air valve bore and this will determine your booster:
- 2002 boosters have a 3/8″ OD air valve seal. Boosters are marked “ATE T50/29/10”
- E9/E12 boosters have a 7/16″ OD air valve seal. Boosters are marked “ATE T50/29/33”
To replace all of your booster seals, you will need a special tool to remove the air regulator valve cap. These can be found here.
**Please note, due to global supply chain issues, a couple of parts included in this kit are currently on backorder, and we’re currently working hard on an interim solution**
2002 Booster, E9 Booster